微型ICP激發源激發性能測試研究.pdf

1、河北大學碩士學位論文微型ICP激發源激發性能測試研究姓名：宋海軍申請學位級別：碩士專業：檢測技術與自動化裝置指導教師：王永清2011-05Abstract IIAbstract Miniaturization and integration is one development trend for optical spectrum instruments.The miniaturization of its excitation sou

2、rce play an important role in this development. Currently, inductively coupled plasma(ICP) excitation source is most widely used in atomic emission spectrometry instruments, so the research on micro-ICP excitation source

3、 have a major impact on the miniaturization of optical spectrum instruments. In this thesis, research and improvement of excitation performance for the excitation source is the main task. Its working gas has been chosen

4、and background spectral lines has been detected. Ideal working parameters and excitation temperature were also researched. Micro-ICP excitation source excited some sample gas such as methane and butane, detection and qua

5、litative analysis of the spectral lines were done. This paper summarized the development trend of spectroscopic instruments and recent research on micro-ICP excitation sources. Made a brief introduction on the productio

6、n theory of atomic emission spectroscopy, principles of chemical element qualitative analysis and quantitative analysis and analysis methods. Micro-ICP excitation source excited argon, air, argon and air mixture， spectra

7、l lines of excitation light were detected by AvaSpec-3648-USB2 miniature fiber optic spectrograph which made by Avantes company from Netherlands. 27 argon atomic spectral lines and 22 nitrogen molecular atomic spectral l

8、ines were detected which are background spectral lines. Argon is better working gas after experiment contrast with air. According to argon line intensity, experiment research on the working parameters selection and argon

9、 excitation temperature have been done. When the micro-ICP excitation source ideally working, the parameters of plane spiral coil, its number of turns is 3, external diameter is 10 mm. Argon line intensity increased when

10、 RF power increased, increased firstly and then decreased when Ar pressure increased. Ideal RF power is from 18 to 22 W, ideal working gas pressure is from 50 to 70 Pa. Argon excitation temperature increased when RF powe

11、r and Ar pressure increased, the calculated argon excitation temperature is between 1600 and 3000 K. Micro-ICP excitation source excited sample gases such as methane and butane, and their spectral lines were detected an