經濟與管理專業外文翻譯--運用作業成本法和經濟增加值的具體應用

1、<p>　　A field study:SMALL manufacturing companies</p><p>　　In this section, the implementation of the proposed Integrated ABC-EVA System at two small manufacturing companies is presented. The managers o

2、f the companies wished for their company names to remain anonymous. Therefore, they will be referred to as “Company X” and “Company Y” from here on.</p><p>　　Prior to the field study, both companies were usi

3、ng traditional costing systems. The overhead was allocated to product lines based on direct labor hours. In both companies, managers felt that their traditional costing systems were not able to provide reliable cost info

4、rmation.</p><p>　　1 Company X</p><p>　　Company X, located in Pittsburgh, Pennsylvania, was a small manufacturing company with approximately 30 employees. Company X’s main products lines were Ove

5、rlays、Membranes、 Laser、Roll Labels and N’Caps. In the mid 1990’s, a group of investors purchased the company from the previous owner-manager who had retired. At the time of the study, the company was managed by its forme

6、r vice-president, who was supported by a three-person management group. Investors were primarily concerned with financial per</p><p>　　2 Company Y</p><p>　　Company Y, also located in Pittsburgh,

7、 Pennsylvania, was owned and managed by three owner-managers who bought the company from a large corporation in the mid 1990’s, Company Y employed approximately 40 people. The majority of this company’s business was in t

8、he area of manufacturing electrical devices and their main product lines were Motors and Motor Parts、Breakers、 and Control Parts. Company Y sold its products in the domestic market as well as abroad. A portion of the com

9、pany’s output was sold</p><p>　　3 Comparison of the costing systems</p><p>　　During the field study, three costing systems (TCA, ABC and the Integrated ABC-EVA System) were used to obtain cost i

10、nformation for each company in order to identify factors which may lead to distortions through arbitrary allocation of capital costs. In a comparison, capital costs were only able to be traced by the Integrated ABC-EVA S

11、ystem. The nature of the TCA and ABC systems resulted in arbitrary allocations of capital costs.</p><p><b>　　4 RESULTS</b></p><p>　　The main objective of the data analysis presented

12、in this section is to investigate which factors most often distort information provided by the ABC system. As mentioned in the methodology section, factors such as diversity in production volume、product size、product comp

13、lexity、 material consumption, and setups often distort cost information. These factors are examined closely for possible allocation errors.</p><p>　　4.1 Data Analysis for Company X</p><p>　　The

14、data analysis for Company X began with an examination of its cost structure. Company X’s overall costs for 1998 were evaluated by comparing the percentages of direct costs (direct labor and direct material)、operating cos

15、ts (overhead) and capital costs as shown in Exhibit 1. </p><p>　　Exhibit 1. Cost Analysis for Company X in Thousands of Dollars</p><p>　　Capital costs, at 11.6 percent, represented a nota

16、ble portion of Company X’s total costs. This relatively high capital costs could be explained by high investments in special equipment and fixed assets. In addition, Company X required a relatively large amount of workin

17、g capital to support its wide variety of products.</p><p>　　The next step was to calculate product cost information and examine changes across six product lines and three costing systems. Exhibit 2 and Exhib

18、it 3 present the results.</p><p>　　Exhibit 2. Product Cost Information in Thousands of Dollars</p><p>　　Exhibit 3. Changes in Product Cost Information after Including Capital Costs</p&

19、gt;<p>　　The Integrated ABC-EVA System, taking into account capital costs, revealed that the overall product cost was actually 13.1 percent higher than either TCA or ABC estimated. The difference in product cost,

20、however, was not uniform across all product lines. After adding capital costs to the product cost obtained from the ABC system, the greatest difference in product cost was observed in the Overlays product line (+ 16.6 %)

21、 while the least difference was registered in the N’Caps product line (+ 4.9</p><p>　　Company X’s management was surprised when presented with the results of using the Integrated ABC-EVA System. Familiarized

22、 with the calculations used, the managers agreed that the results were correct. Knowing that the Overlays product line was the only product line which created economic value, they considered extending marketing efforts f

23、or this product line. In contrast, for the Laser product line (considered to be profitable according to the TCA and ABC systems, but revealed to be destructive</p><p>　　4.2 Data Analysis for Company Y</p&

24、gt;<p>　　The data analysis for Company Y also began with an examination of its cost structure. As in Company X’s analysis, Company Y’s costs for 1998 were evaluated by comparing the percentages of direct costs (di

25、rect labor and direct material)、operating costs (overhead) and capital costs as shown in Exhibit 4.</p><p>　　Exhibit 4. Cost Analysis for Company Y in Thousands of Dollars</p><p>　　Oper

26、ating costs, at approximately 42 percent, represented a notable portion of Company Y’s total costs. Company Y’s business, with its customized products (such as motors and generators) required a relatively high amount of

27、effort in engineering design、 product specification and supervision. Therefore, a highly qualified work force was essential. The high salaries paid to these employees were the reason for Company Y’s relatively high opera

28、ting costs.</p><p>　　Next, as in Company X, product cost information for four product lines, obtained by the three costing systems, was investigated and presented to the managers. Exhibit 5 and Exhibit 6 pre

29、sent results of this analysis.</p><p>　　Exhibit 5. Product Cost Information in Thousands of Dollars</p><p>　　Exhibit 6. Changes in Product Cost Information after IncludingCapital Costs&

30、lt;/p><p>　　Again, the Integrated ABC-EVA System taking into account capital costs, revealed that the overall product cost was higher than TCA or ABC estimated, this time by 7.6 percent. This difference in prod

31、uct cost, once again, was not uniform across product lines. The greatest difference (compared to ABC) was registered in the Breakers product line (+ 8.5 %), while the least difference was registered in the Control Parts

32、product line (+ 6.5 %). Once again, it can be concluded that an arbitrary allocati</p><p>　　Company Y’s management was especially surprised by the fact that the Motors and Motor Parts product line, which was

33、 believed to be highly profitable under both the TCA calculation and the ABC, was not actually able to create any economic value. This assumption of profitability was contradicted by the Integrated ABC-and-EVA System. Be

34、cause the Economic Value Added for Motors and Motor Parts product line was only slightly negative, the managers believed a slight increase in price would make the Mo</p><p>　　4.3 Summary of the Results</p

35、><p>　　This analysis shows that the ability of the Integrated ABC-EVA System to provide reliable cost information increases especially in cases where products are dissimilar、manufacturing technologies and equip

36、ment are diverse and capital cost is high. Of the companies studied, Company X had not only the higher capital costs, but also the greatest product diversity, As a result, the analysis showed a relatively high distortion

37、 in product cost between the ABC and ABC- EVA systems;The highest distortion </p><p>　　5 CONCLUSIONS</p><p>　　The findings for both companies are highly similar. These findings confirm that trad

38、itional accounting systems often provide inaccurate、incomplete and unreliable cost information. Arbitrary allocation of operating and capital costs may often lead to distortions in product cost.</p><p>　　Fu

39、rthermore, the results suggest that the ABC system alone, though able to manage operating expenses and shows deficiencies, especially when capital investments are substantially diverse. When capital investments are subst

40、antially diverse (because of variation in production volume, technology, setups, materials or product complexity, for example), the ABC system is no longer a reliable strategic management tool for successful decision–mak

41、ing.</p><p>　　The managers of each company in the field study expressed great satisfaction with the reliability and completeness of the Integrated ABC-EVA System. They regarded the System as a very useful st

42、rategic managerial tool. As a result of this implementation, the managers also changed certain corporate policies. These changes included adjustments in product costing、marketing strategies and perception of customer pro

43、fitability. Overall, this field study demonstrated that the integration of a costing sy</p><p>　　原文來源:The Integrated Activity-Based Costing and Economic Value Added Systemas a Strategic Management Tool: A Fi

44、eld Study[J]. Engineering Management Journal, 2000</p><p>　　運用作業成本法和經濟增加值的具體應用：小制造企業</p><p>　　本部分將闡述兩家小制造企業中，被建議使用的ABC-EVA整合系統的實施情況。公司的管理層希望他們的公司名稱保持匿名。所以，下文中他們被稱為X公司和Y公司。</p><p>　　

45、在案例分析之前，兩家公司都使用傳統的成本系統。根據直接人工小時分配各費用至各產品線。兩家公司的管理者認為傳統成本系統不能提供可靠的成本信息。</p><p><b>　　1 X公司</b></p><p>　　X公司，位于匹茲堡，賓夕法尼亞，是一家大約有30名員工的小制造企業。X公司主要的產品是覆蓋物，過濾膜，激光器，卷標簽和組合應用平臺軟件。在90世紀中期，一個投資

46、集團從已經退休的前所有者那購買了此公司。在研究之時，公司由前副總裁經營，他由三人管理集團支持。投資者首先關心財政業績，而不是每日的政策制定。由于兩方面原因，此管理集團非常熱切地想?yún)⑴c到此次實際應用研究中。首先，新投資者不滿意于目前生產的產品所帶來的收益率，這給管理層施加了壓力；其次，為開展對整體利潤有最大促進作用的經營活動，管理層嘗試開發能產生豐厚利潤的產品。</p><p><b>　　2 Y公司&l

47、t;/b></p><p>　　Y公司，也位于匹茲堡，賓夕法尼亞，由三人管理者擁有和經營，此管理層在90世紀中期從一個大公司那購買了Y公司，Y公司雇傭近40名員工。這公司的絕大多數業務在電子設備制造領域，他們的主要產品是馬達、馬達零件、破碎機和控制零件。Y公司在國內外市場上銷售它的產品。公司部分產品直接銷售給最終消費者，而剩下的產品在獨立經銷商幫助下銷售。為實現成本控制和利潤規劃的目標，Y公司的管理層對運用

48、ABC-EVA整合系統極感興趣。</p><p>　　3 成本核算系統的比較 </p><p>　　實際應用研究期間，為了識別因資本成本的任意分派可能導致成本信息扭曲的各因素，將運用三個成本核算系統(TCA、ABC和ABC-EVA整合系統)分別得到每家公司的成本信息。比較三個系統，各資本成本只能由ABC-EVA整合系統追蹤。TCA和ABC系統的本質導致資本成本的任意分派。</p>

49、;<p><b>　　4 結論</b></p><p>　　在此部分，分析數據的主要目標是調查哪些因素最可能扭曲ABC系統提供的成本信息。按照所述的方法學部分，例如生產量、產品大小，產品的復雜性、材料耗費和配置各因素將可能扭曲成本信息。為防止錯誤分配資本成本，將仔細分析各因素。</p><p>　　4.1 X公司的數據分析</p><

50、p>　　X公司的數據從它的成本結構的分析開始。1998年，X公司的總成本評估是通過比較如表1顯示的直接成本 (直接人工和直接材料)、營業成本(作業成本)和資本成本的百分比加以評估的。 </p><p>　　表1 x公司的成本分析 千美元</p><p>　　資本成本占11.6%，占X公司總成本的一部分。專用設備和固定資產的高額投資導致相對

51、高的資本成本。另外，X公司要求相對多的流動資本以支持豐富的產品種類。 </p><p>　　下一個步驟將計算產品成本、分析六種產品和各成本核算系統的變化情況。表2和表3顯示了分析結果。</p><p>　　表2 產品成本信息 千美元</p><p>　　表3 包含資本成本后的產品成本信息的變化</

52、p><p>　　ABC-EVA整合系統由于考慮了資本成本，計算得出的總產品成本較TCA或ABC系統下所估計的高出13.1%。然而，所有產品的成本差異程度是不一致的。將資本成本增加到在ABC系統下得出的產品成本后，成本最大的變動在覆蓋物產品中體現出來(高出+16.6%)，而最小變動在組合應用平臺軟件產品中體現(高出+ 4.9%)。從這些可以得出，ABC系統下，將資本成本隨意分配到產品，所得到的成本信息是不精確的。例如，

53、增加13.1%的資本成本到所有產品將扭曲X公司的成本信息。</p><p>　　當使用ABC-EVA整合系統所產生的結果呈現在X公司管理層時，他們感到很驚訝。管理層熟悉曾經使用過的成本核算方法，認可了研究結論的正確性。了解到覆蓋物產品是唯一創造經濟價值的產品，他們考慮加大對這個產品的市場力度。相反，至于激光產品（TCA和ABC系統下，被認為是盈利的，但是根據ABC-EVA整合系統下，其對股東價值具有破壞性)，管理

54、層表示將改變產品價格制定政策，并且在減少追加成本方面做出努力。此外，他們考慮了無經濟利潤的低產量產品的外購政策(例如組合應用平臺軟件和混和零件)。</p><p>　　4.2 Y公司的數據分析</p><p>　　Y公司的數據從它的成本結構的分析開始。同X公司分析，1998年，Y公司成本通過比較如表4所顯示的直接費用(直接人工和直接材料)、營業成本(作業成本)和資本成本的比例加以評估。 &

55、lt;/p><p>　　表4 Y公司的成本分析 千美元</p><p>　　營業成本大約占42%，占Y公司總成本的重要部分。擁有定制產品(例如馬達和發電器)的Y公司，其業務需要相對高要求的工程設計、產品規格和管理。因此，高資質的勞動力是必要的。付給這些員工的高薪金就是導致Y公司相對高的營業成本的原因。</p><p&g

56、t;　　其次，同X公司，分析在三個成本系統下得到的四個產品的成本信息，并提供給Y公司管理層。表5和表6顯示此分析結果。 </p><p>　　表5 產品成本信息 千美元</p><p>　　表6 考慮資本成本后的產品信息變化</p><p>　　同理，ABC-EVA整合系統由于考慮了資本成本，計算得

57、出的總產品成本較TCA或ABC系統下所估計的高出7.6%，再次說明根據不同產品，成本變動是不一致的。最大的變動（與ABC系統下相比較)表現在破碎機產品(高出+ 8.5%)，而最少的變動表現在控制零件產品 (高出+6.5%)。同理可得ABC系統下，將資本成本隨意分配到產品，將扭曲產品成本。</p><p>　　對在TCA系統下計算得到的數據和ABC系統下被認為能產生高效益的馬達和馬達零件產品實際上卻沒能創造任何經濟

58、價值的事實，Y公司的管理層感到特別驚奇。在ABC-EVA整合系統下，這種收益率的假設是矛盾的。因?yàn)轳R達和馬達零件產品的經濟增加值只有輕微的負數，經理相信小幅度提高產品價格，將使馬達和馬達零件產品成為價值創造者。他們認為，在這個獨有的產品線上，公司擁有特別強大的市場地位，因此漲價是可行的。</p><p><b>　　4.3 總結</b></p><p>　　分析表明，

59、尤其在產品不同、制造技術和設備多樣化、資本成本高的情況下，ABC-EVA整合系統能提供更可靠的成本信息。在參與研究的公司中，X公司不僅具有更高的資本成本，而且產品差異最大，結果表明在ABC系統和ABC-EVA整合系統間存在相對嚴重的產品成本扭曲；Y公司的產品作業成本更高，TCA和ABC-EVA整合系統間存在最嚴重的產品成本扭曲。至于Y公司，與根據直接人工時數簡單分配產品成本的TCA系統相比，ABC-EVA整合系統中的ABC能夠精確地追蹤

60、生產成本。</p><p><b>　　5 結論</b></p><p>　　兩家公司的研究結果相當相似。 這些研究結果證實傳統的會計成本系統經常提供不精確、不完全和不可靠的成本信息。作業成本和資本成本的任意分配可能導致產品成本的扭曲。</p><p>　　此外，結果顯示ABC系統盡管能夠計算作業成本，若單獨使用將表現出缺陷，尤其當資本投資有相

61、當大的差異時。當資本投資有相當大的差異時（例如，因?yàn)樯a(chǎn)量的變化、技術、配置、材料或者產品復雜性)，在長期決策制定上，ABC系統不再是一個可靠的戰略管理工具。</p><p>　　在實際研究中，每家公司的管理者對ABC-EVA整合系統的可靠性和完整性表示非常滿意。他們認為ABC-EVA整合系統是一個非常有用的戰略管理工具。根據實施應用的結果，各管理者也改變了某些企業政策。這些變動包括產品費用、市場戰略及對預期盈利