工作面刮板輸送機技術現狀與發展趨勢畢業論文外文翻譯

1、<p><b>　　中文4410字</b></p><p><b>　　英語翻譯</b></p><p><b>　　英文原文</b></p><p>　　Scraper conveyor of the status quo and development trend of technolo

2、gy</p><p>　　Abstract: The Face scraper conveyor of the machine and its head, tail, the central trough, ring linked, soft-start devices, components of the technical status quo and development trend, and made

3、China's development scraper conveyor Trend.</p><p>　　Key words: scraper conveyor with two, components, development trends.</p><p>　　In recent years, with high yield and high efficiency of th

4、e rapid development of intensive mine, the coal mine in a mine to achieve a high degree of concentration of wells a production model. Face the long arm as the main transportation equipment, the scraper conveyor transport

5、 capability mainly by high yield and high efficiency of the production capacity of the mine to decide, but also determines the scraper conveyor trend of development.</p><p>　　1 Technology status</p>&

6、lt;p>　　Since the 1980s, both at home and abroad scraper conveyor to the large volume, long distance, high-power, high-intensity, high reliability and long life direction. At present, the largest foreign Fully-face scr

7、aper conveyor to transport volume has reached 6000 t / h, installed power 4 × 800kW, distance 450 m. Domestic independent research and development of the scraper conveyor transport volume has reached 3500 t / h, ins

8、talled power 3 × 700kW, distance 300 m. With God East, and other large coal</p><p>　　2 Yuan parts of the technical status quo</p><p><b>　　2.1 Head </b></p><p>　　Wit

9、h the fully mechanized coal face of rapidly increasing production apacity, scraper conveyor-unloading has been difficult to meet the requirements of domestic and foreign large volume of heavy scraper conveyor adopt cross

10、-lateral institutions unloaded, the agency after several generations of improvements in the ability to offload , Efficiency, life and other aspects of a big increase. At the same time, unloading a high degree of reduced

11、support for the fully mechanized coal mining has brought </p><p><b>　　2.2 Tail </b></p><p>　　For long distance, high-power scraper conveyor, the chain tension need greater flexibilit

12、y trip, both at home and abroad using retractable tail, and is divided into manual and automatic tight chain tight chain. Manual tight chain system is regularly measured by the chain of artificial tension, stretching the

13、 tail, which can not guarantee the chain will always be in the best state of tension and the automatic system is the ideal tight chain of tension, as shown in Figure 1. The system in the chai</p><p>　　Figure

14、 1 automatically tensioning system</p><p>　　2.3 Sprocket components </p><p>　　Sprocket scraper conveyor components is the key component, and its development trend of improving the reliability of

15、 sprocket components, the price increase sprocket accuracy, improving heat treatment process to extend the life of sprocket. At present sprocket components in the structure of use of double-row tapered roller bearings,

16、light oil lubrication, nose and tail of the sprocket components are the same, through different gear reducer coupling connection with the replacement of underground</p><p>　　In addition, from sprocket on the

17、 tooth to be improved, for example, a company design the GR-sprocket and there is great difference between conventional sprocket, which always has three sprocket tooth led the entire load. 3 tooth contact will inevitably

18、 reduce the wear chain and sprocket, thereby extending the life of the chain and sprocket, reducing the chain elongation, power transmission efficiency is higher.</p><p>　　2.4 Soft-start devices </p>

19、<p>　　Foreign advanced conveyor transmission use of soft-start technology, in scraper conveyor on the successful use of the soft-start main valve control device-filled hydraulic coupler, CST controllable start and t

20、he exchange of electrical transmission system, such as Frequency Control . Because there is no domestic mature technologies and products, the China-made high-power scraper conveyor used in soft-start device for all impor

21、ted products. Figure 2 was developed by Germany-filled hydraulic valve </p><p>　　2.4.1-filled hydraulic valve control coupled with the principal technical characteristics</p><p>　　⑴ can achieve

22、the empty scraper conveyor start and overload protection;</p><p>　　Change can be achieved through </p><p>　?、?scraper conveyor the frequent start, without limitation start frequency; </p>

23、<p>　?、?through hydraulic coupler divisions will also re-order the multi-drive can be achieved under the load balancing;</p><p>　?、?slow post-mortem can be linked; </p><p>　?、?dual-chamber

24、 design, compact, power transmission components without mechanical contact, high reliability.</p><p>　?、?with water as a working fluid, safe and convenient and cheap, through pipes or water supply, drainage

25、tube through the pump row, row of pressure from the main hydraulic motor-driven cycle produced by the pilot of the portfolio directly to the valve To control the water cycle;</p><p>　?、?without affecting the

26、 power transmission circumstances, * Change to heat through. </p><p>　　Figure 2 DTP-valve-controlled oil-filled hydraulic coupler</p><p>　　2.4.2CST controlled transmission system activated the m

27、ain technical characteristics </p><p>　?、?in any load can track any launch curve, the speed of plus or minus any adjustment;</p><p>　　⑵ relative speed hydraulic coupler, the transmission efficie

28、ncy;</p><p>　?、?an arbitrary controlled under the conditions of parking capacity；</p><p>　　⑷ can be driven to achieve more balance of power between the high-precision, balance accuracy up to 98

29、percent;</p><p>　　⑸ conveyor of all mechanical, electrical system overload protection, the protection system fast response;</p><p>　?、?be running low on time, and cashing in on the trend post-mo

30、rtem chain;</p><p>　　⑺ scene debugging simple, it is easy to modify the parameters online and debugging.</p><p>　　2.4.3 AC motor technology the main technical characteristics </p><p&g

31、t;　?、?and other soft-start mode compared to the full realization of electrical soft-start control, scraper conveyor drive system and power supply system to maximize the simplification; </p><p>　?、?start-up t

32、ime can be loaded with self-regulation; </p><p>　　⑶ achieved a scraper conveyor loaded with empty and the smooth start-up; </p><p>　?、?significantly reduce the starting current and improve the q

33、uality of electricity supply grid, power grid to reduce impact.</p><p>　　2.5 Central groove </p><p>　　Central trough conveyor of the whole face of the trunk, its life is a measure of an importan

34、t indicator of life. At present the central trough use of Σ trough-shaped cross section for the whole cast back cover welding structure, life expectancy has reached 10 million t. To further improve the service life of th

35、e major manufacturers of domestic and foreign central trough of form, structure and materials have done a great deal of research. Such as Germany of a company through research and developm</p><p>　　Figure 3

36、scraper and Σ arc-shaped cross section and the section for surface trough comparison</p><p>　　From top to bottom for a slot on the design, shown in Figure 4, from top to bottom slot for the same, you can cho

37、ose any thickness and width of the plate in the central trough design makes for greater flexibility. Slot for each board and the central slot between the two Weld, the central side of the trough of four seam, only on the

38、 inside of the tank to help withstand the wear and tear a seam, even if it was polished welds , The central trough can maintain a high degree of stability.</p><p>　　Figure 4 4-steel tank to help design and w

39、ear contour</p><p>　　Help create a slot on the Rolling materials, steel rolling on the surface than the smooth casting of steel, small friction. Central tank plate using high-strength steel hardening Wear-re

40、sistant, wear little. Rolling in the central trough lateral welding dumbbell Block, will not help reduce the thickness of groove. Forging dumbbell on the design and ensure that the central trough Yaling not Block damage,

41、 and the youngest is basically breaking strength of 1.5 times the dumbbell, so the fault is al</p><p>　　Another trough of the central structure of the tank from top to bottom-of-duplication, this form can be

42、 set from top to bottom groove and the failure of different conditions for different structural design and material selection, and easy on the replacement tank, will help improve strength and Life. The central trough in

43、the form of SGZ880 / 2 × 400-type double-stranded in the cross-side dumping in the face scraper conveyor has been successfully applied. </p><p>　　2.6 Ring linked </p><p>　　Circle as a scrap

44、er conveyor chain of traction, its tensile strength directly related to the reliability of. At present, China's largest ring linked to φ42 mm × 146mm compact chain, tensile strength of 2270 kN, the largest forei

45、gn ring linked to φ48 mm × 152mm compact chain, tensile strength of 3550 kN. With the ring linked the increasing size of the central trough of higher and higher, conveyor magnificent performance declined, the gatewa

46、y if not thorough clean-up will also affect passage of co</p><p>　　2.6.1 Materials and Technology </p><p>　　In order to improve the roundabout chain of tensile strength, the current foreign Grad

47、e C and D-linked ring in the large-sized materials with 23 MnNiCrMo54, 23MnNiCrMo54 and 23 MnNiCrMo64 scouring steel, tensile strength limit ≥ 1600 ~ 1800 MPa. Welding Technology: the use of advanced welding equipment, w

48、elding and the use of flash returns processing technology, successfully resolved the surfacing of the process of overheating, such as a burning issue. In quality testing, the use of scanning str</p><p>　　2.6

49、.2 form and geometry </p><p>　　In 1985 the first to create a company 38 mm × 137mm flat chain. Flat is linked each of the chain is still ring-Central, Central was "squeezed" the flat ring. Fla

50、t chain link sliding work to reduce the size of the increase in the chain of slot pressure on the units and improve the legislation of the Central wear resistance; reduce its high level of the chain more easily through t

51、he sprocket, but can also reduce the capacity of power transmission and Bays of a high degree. Modern high-performance </p><p>　　Figure 5 conventional chain and a new wide-body linked flat</p><p&g

52、t;　　In 2003, the company has developed a wide-body at a flat linked, as shown in Figure 5. It is a high-intensity, low-chain, has the following characteristics:</p><p>　?、?using this chain can reduce the hig

53、h scraper chain, thereby reducing the central trough height, eventually reduce the use of high-mining, coal mining to meet thin. </p><p>　　⑵ using this chain can reduce the use of power, or power in the same

54、 circumstances, increase the length of face, it will greatly reduce the workload of opening up, reducing the number of face move.</p><p>　?、?this forging of wide-body flat link chain has increased the contac

55、t area, can improve the chain link at the same time reduce the intensity of the wear and helps to maintain the rigidity of chain link. Such as a flat 42 mm chain can take 2 × 855kW of installed power, and 50 mm wide

56、-body flat can be linked up to 3 × 1000kW bear the installed power.</p><p>　　2.6.3 intelligent conveyor chain </p><p>　　As unable to accurately predict the failure of the chain, according t

57、o conventional practices are generally ahead of the replacement of the chain. In 2005 a company with a number of research institutes to study the development of a conveyor chain-detection system, as shown in Figure 6. Th

58、is is a combination of integrated sensor technology of intelligent conveyor chain, it will stress the chain of real-time record, the help of micro-electronics technology devices, from computers that the chain of</p>

59、;<p>　　2.7 The link chain </p><p>　　The link chain-rings are used for the link chain and ring for legislation to link the two in recent years has tended to adopt legislation to link the ring, then suc

60、h a chain link through the sprocket and not linked A round of contacts, so there will not be worn.</p><p>　　Blockmaster the link chain is a new legislation for a flat linked to the Central chain link shown i

61、n Figure 7, because of their extreme length of closure, at the time of installation without relaxation chain; their innovative design concept, two-way installation, do not have to consider the direction of transmission,

62、There is the possibility of anti-loaded, the link chain block in central lock can be avoided chain kink, but also increased the strength of the link chain, such as 42 mm × 146mm Blo</p><p>　　Figure 6 sm

63、art conveyor chain</p><p>　　2.8 High-power transmission gear</p><p>　　Scraper conveyor of the low-speed transmission is characterized by heavy, impact resistance, small in size but poor lubricat

64、ion and cooling. In order to obtain high-performance gear transmission device, to be constantly raise the level of product and manufacturing standards involved. </p><p>　　Figure 7 Blockmaster the link chain&

65、lt;/p><p>　　2.8.1 raising the level of design</p><p>　　Raise design standards to improve the design means first of all, the use of advanced design techniques. At present, some companies developed b

66、ased on the load and deformation of the tooth contour design and calculation software and books used in high gear shift, with the bending stress on the tooth for finite element analysis to improve the shape of teeth with

67、 the transition to full gear in case meshing State be greatly improved and increased contact with strength,elasticity and the use of finit</p><p>　　2.8.2 raising the level of manufacturing </p><p&

68、gt;　　Scraper conveyor gear more than a surface treatment of advanced hardening of low carbon steel materials, the hardening process are: carburizing, nitrogen and surface hardening. With the increase in power transmissio

69、n gear, the relative size decreases, Chilian contact stress and teeth with a substantial increase in bending stress. Gear crystal material between the impurities often become the source of fatigue crack initiation. At pr

70、esent, the major international manufacturers scraper conveyor wid</p><p>　　3 China scraper conveyor direction of development</p><p>　　With coal mine production of intensive development, has a lo

71、ng wall face fully mechanized coal mining equipment and technology has been to the high-end development, to meet the production capacity, a high degree of automation, safety and reliability of production requirements. At

72、 present, China's scraper conveyor of the design and manufacture close to the level of similar foreign models, but in the life of key components, reliability and innovation in such areas as compared with foreign coun

73、trie</p><p><b>　　中文譯文</b></p><p>　　工作面刮板輸送機技術現狀與發展趨勢</p><p>　　摘要：闡述了工作面刮板輸送機整機及機頭、機尾、中部槽、圓環鏈、軟啟動裝置等元部件的技術現狀與發展趨勢，并提出了我國刮板輸送機的發展方向。</p><p>　　關鍵詞：刮板輸送機；元部件；技術

74、現狀；發展趨勢。</p><p>　　近年來隨著高產高效集約化礦井的迅速發展，煤礦都在爭取實現一礦一井一面的高度集約化生產模式。作為長臂工作面的主要運輸設備，刮板輸送機的輸送能力主要由高產高效礦井的生產能力來決定，同時也決定了刮板輸送機的發展趨勢。</p><p><b>　　1整機技術現狀</b></p><p>　　20世紀80年代以來，國

75、內外刮板輸送機都在向大運量、長運距、大功率、高強度、長壽命與高可靠性方向發展。目前，國外綜采最大的工作面刮板輸送機，去運量已達6000t/h，裝機功率4×800kW，運距450m。國內自主研發的刮板輸送機運量已達3500t/h，裝機功率3×700kW，運距300m。隨著神東等大型煤炭基地400m工作面的出現，國產刮板輸送機將朝著更大型的方向發展。但是運量、運距和功率的增大受到諸多因素的限制。首先，中部槽的高度不宜太高

76、，否則會影響裝煤效果。其次，輸送機的長度也不宜太長，會降低推進速度。然后最主要的影響因素還在于關鍵元部件的技術性能和壽命。所以，在刮板輸送機向大型化發展的同時，高性能元部件的研發將成為今后刮板輸送機的發展重點，軟啟動技術、工況檢測、運行狀態控制等機電一體化技術的運用將成為今后刮板輸送機發展的重要標志。</p><p><b>　　2元部件的技術現狀</b></p><p&

77、gt;<b>　　2.1機頭部</b></p><p>　　隨著綜采工作面的生產能力迅速提高，刮板輸送機端卸載已經難以滿足要求，國內外大運量重型刮板輸送機均采用交叉?zhèn)刃遁d機構，該機構經過幾代改進，在卸載能力、效率、壽命等方面都有了很大的提高。同時，卸載高度的降低也為綜采配套帶來了便利。</p><p><b>　　2.2機尾</b></p&

78、gt;<p>　　對于長運距、大功率刮板輸送機，鏈條張緊需要較大的伸縮行程，目前國內外均采用可伸縮機尾，并分為手動緊鏈系統和自動緊鏈系統。手動緊鏈系統是靠人工定時測量鏈條張力，伸縮機尾，所以不能保證鏈條始終處于最佳張緊狀態；而自動緊鏈系統才是理想的張緊方式，如圖1所示。該系統在鏈條與機頭、機尾驅動鏈輪分離后的鏈道下方安置有張力傳感器，根據鏈條的實際張力控制張緊油缸。使用了這種自動緊鏈系統，輸送機運行時鏈條將始終保持最佳張緊

79、狀態，延長了鏈條的使用壽命，縮短了停機時間。</p><p><b>　　2.3鏈輪組件</b></p><p>　　鏈輪組件是刮板輸送機的關鍵元件，其發展趨勢時提高鏈輪組件的可靠性，提高鏈輪的價格精度，改進熱處理工藝，延長鏈輪的使用壽命。</p><p><b>　　圖1自動張緊系統</b></p><

80、;p>　　目前鏈輪組件在結構上多采用雙列圓錐滾子軸承，稀油潤滑，機頭和機尾的鏈輪組件是一樣的，通過不同的齒輪聯軸器與減速器聯接，在井下更換時不用拆卸減速器；鏈輪采用高強度合金鋼，吃面淬火硬度達到HRC55，有效硬化層深度達10mm以上，使用壽命可達到400～500萬t過媒量。</p><p>　　另外，從鏈輪的齒形上加以改進，例如，某公司設計的GR型鏈輪與常規鏈輪就有很大區別，這種鏈輪始終有3各輪齒帶動整個

81、載荷。3個輪齒接觸必然會降低鏈輪和鏈條的磨損，從而延長鏈輪和鏈條的使用壽命，減小鏈條伸長率，功率傳輸效率也較高。</p><p><b>　　2.4軟啟動裝置</b></p><p>　　國外先進的輸送機傳動裝置多采用軟啟動技術，目前在刮板輸送機上成功使用的軟啟動裝置主要有閥控充液式液力耦合器、CST可控啟動傳輸系統和交流電機變頻調速等。因國內尚無成熟的技術和產品，所

82、以國產大功率刮板輸送機采用的軟啟動裝置全部為進口產品。圖2為德國研制的DTP閥控充液式液力耦合器。</p><p>　　圖2DTP閥控充液式液力耦合器</p><p>　　2.4.1閥控充液式液力耦合器的主要技術特點</p><p>　?、趴梢詫崿F(xiàn)刮板輸送機的空載啟動和過載保護；</p><p>　?、仆ㄟ^換水可以實現刮板輸送機的頻繁啟動，而

83、不必限制啟動頻率；</p><p>　?、峭ㄟ^告便液力耦合器的重也順序可以實現多機驅動下的負載平衡；</p><p>　?、瓤梢詫崿F(xiàn)慢速驗鏈；</p><p>　?、呻p腔設計，結構緊湊；功率傳遞部件無機械接觸，可靠性高。</p><p>　?、室郧逅鳛楣ぷ饕?，安全方便而且廉價，可以通過水管或水箱供水，通過排液泵管排水，排液壓力由主電機帶動的

84、液力循環產生，通過本安型先導組合閥直接對 水循環進行控制；</p><p>　?、嗽诓挥绊懝β蕚鬏?shù)那闆r下，通過換水來散熱。</p><p>　　2.4.2CST可控啟動傳輸系統的主要技術特點</p><p>　　⑴在任意載荷下可以跟蹤任何啟動曲線，加減速度任意調節；</p><p>　　⑵相對調速型液力耦合器而言，傳動效率高；</p&

85、gt;<p>　?、蔷哂腥我鈼l件下的可控停車能力。</p><p>　?、瓤蓪崿F(xiàn)多點驅動之間高精度的功率平衡，平衡精度可達98%；</p><p>　?、蓪斔蜋C所有機械、電器系統提供過載保護，保護系統響應速度快；</p><p>　?、士梢陨蠒r間低速運行，實現免俗驗鏈；</p><p>　?、爽F(xiàn)場調試簡單，可以很方便地在線進行

86、參數修改與調試。</p><p>　　2.4.3交流電機變頻調速技術的主要技術特點</p><p>　?、排c其他軟啟動方式相比，全部實現了電器軟啟動控制，刮板輸送機傳動系統和供電系統得到最大的簡化；</p><p>　?、茊訒r間可隨負載自行調節；</p><p>　?、菍崿F(xiàn)了刮板輸送機滿載及空載的平穩啟動；</p><p

87、>　　⑷大幅度降低了啟動電流，提高電網供電質量，減少電網沖擊。</p><p><b>　　2.5中部槽</b></p><p>　　中部槽是整個工作面輸送機的軀干，其使用壽命是衡量整機使用壽命的重要指標。目前中部槽多采用∑形斷面槽幫、整體鑄焊封底結構，壽命已達1000萬t。為了進一步提高使用壽命，國內外主要生產廠商對中部槽外形、結構及材料等方面有進行了大量的研

88、究。如德國某公司通過研究和開發，撥那個在井下對不同斷面的中部槽進行大量試驗，最終發現，與∑形斷面槽幫相比，弧形斷面槽幫使刮板與槽幫內側面接觸液力小，從而減小摩擦阻力，降低功率消耗，延長中部槽和刮板的壽命。刮板與∑形斷面和弧形斷面槽幫接觸面比較如圖3所示。</p><p>　　槽幫上采用上下分體設計，如圖4所示，上下槽幫完全相同，可以選擇任意厚度和寬度的中板使得中部槽設計有更大的靈活性。每個槽幫與中部槽中板之間有2

89、條焊縫，中部槽一側的4條焊縫中，只有上槽幫內側的1條焊縫經受磨損，即使這條焊縫被磨光，中部槽還能保持高度的穩定性。</p><p>　　圖3刮板與∑形斷面和弧形斷面槽幫接觸面比較</p><p>　　槽幫制造上采用軋制材料，軋制鋼材的表面比鑄造鋼材平滑，摩擦小。中部槽中板采用高強度耐磨硬化鋼板，磨損小。在軋制中部槽外側焊接啞鈴座，不會減小槽幫的厚度。鍛造啞鈴座的設計保證中部槽和啞鈴座不受到

90、破壞，最小破斷強度基本上是啞鈴的1.5倍，所以首先斷裂的總是啞鈴。</p><p>　　圖4四節式槽幫鋼設計及磨損輪廓</p><p>　　中部槽的另一種結構形式是上下槽分體重疊式，這種形式可以根據上下槽受載情況和失效狀況不同進行不同結構設計與選材，且上槽更換容易，有利于提高整機強度與壽命。該形式中部槽在SGZ880/2×400型中雙鏈交叉?zhèn)刃豆ぷ髅婀伟遢斔蜋C中得到了成功應用。&

91、lt;/p><p><b>　　2.6圓環鏈</b></p><p>　　圓環鏈作為刮板輸送機的牽引機構，其抗拉強度直接關系到整機的可靠性。目前，國產圓環鏈最大到φ42mm×146mm緊湊鏈，抗拉強度為2270kN，國外圓環鏈最大到φ48mm×152mm緊湊鏈，抗拉強度為3550kN。隨著圓環鏈尺寸的不斷增大，中部槽也越來越高，輸送機壯美效果隨之下降，

92、回采巷道如果清理不徹底還會影響推移輸送機。所以圓環鏈的發展方向是提高抗拉強度和降低立環高度。</p><p>　　2.6.1材料及工藝</p><p>　　為了提高圓環鏈的抗拉強度，目前國外C級和D級大規格圓環鏈在材料方面用23MnNiCrMo54，23MnNiCrMo54和23MnNiCrMo64精練鋼，拉伸強度極限≥1600～1800MPa。焊接工藝方面：采用先進的堆焊設備，采用閃光堆

93、焊和退貨加工工藝，成功地解決了堆焊過程中產生的過熱、過燒等問題。在質量檢測方面，對啦伸斷口利用掃描電纜進行斷口分析；采用圓環鏈預拉伸強化工藝，極大提高了承載能力和疲勞強度。</p><p>　　2.6.2形式與幾何尺寸</p><p>　　1985年某公司率先制造出38mm×137mm扁平鏈。扁平鏈就是每根鏈條的平環仍然是圓環，而立環是被“擠壓”的扁平環。扁平鏈鏈環滑動工作面積的

94、增大降低了鏈條在槽體上的單位壓力，提高了立環的抗磨損性能；鏈條高度的降低使其更容易通過鏈輪，而且可以降低裝機功率和輸送機槽體高度?，F(xiàn)代高性能輸送機一般都涉及配套扁平鏈條。</p><p>　　2003年，某公司有研制處一種寬體扁平鏈，如圖5所示。它是一種高強度、低矮型鏈條，具有以下特點：</p><p>　　圖5常規鏈條和新型寬體扁平鏈</p><p>　?、挪捎眠@

95、種鏈條可降低刮板鏈高度，從而降低中部槽高度，最終使用采高降低，滿足薄煤層開采。</p><p>　?、撇捎眠@種鏈條可以降低使用功率，或在功率不變的情況下，增大工作面的長度，這將極大地減少開拓工作量，減少工作面搬家次數。</p><p>　?、沁@種鍛造的寬體扁平鏈加大了鏈環的接觸面積，可在提高鏈環強度的同時減少磨損，有助于保持鏈環的剛性。如42mm的扁平鏈可以承受2×855kW的裝

96、機功率，而50mm寬體扁平鏈則可承受高達3×1000kW的裝機功率。</p><p>　　2.6.3智能輸送機鏈</p><p>　　由于無法準確地預測鏈條的失效，按常規做法一般都是提早更換鏈條。2005年某公司與多家科研院所合作，研究開發一種輸送機鏈在線檢測系統，如圖6所示。這是一種融合了集成傳感器技術的智能輸送機鏈，它能將鏈條的應力特性實時記錄下來，借助微電子技術裝置，由計算

97、機得出鏈條斷裂前的剩余使用壽命。另外還可以檢測鏈條的預緊力，有利于鏈條在使用壽命期內達到到最佳使用狀態，提高安全性，避免意外事故。</p><p><b>　　2.7接鏈環</b></p><p>　　接鏈環有用于平環的接鏈環和用于立環的接鏈環兩種，近年來一直趨向采用用于立環的接鏈環，這樣的接鏈環在通過鏈輪時不與鏈輪產生接觸，所以也不會有磨損。</p>

98、<p><b>　　圖6智能輸送機鏈</b></p><p>　　Blockmaster接鏈環是一種新型的用于扁平鏈立環的接鏈環如圖7所示，因其閉合長度極端，安裝時無需松弛鏈條；其設計構思新穎，可雙向安裝，不用考慮輸送方向，也不存在裝反的可能，接鏈環中部的鎖塊可避免鏈條扭結，同時也提高了接鏈環的強度，如42mm×146mm的Blockmaster接鏈環破斷拉力達2500k

99、N。</p><p>　　2.8大功率齒輪傳動裝置</p><p>　　刮板輸送機的傳動特點是低速重載、耐沖擊、體積小但潤滑和散熱差。為了獲得高性能齒輪傳動裝置，需不斷提高產品都涉及水平和制造水平。</p><p>　　圖7Blockmaster接鏈環</p><p>　　2.8.1設計水平的提高</p><p>　　

100、提高設計水平首先要提高設計手段，采用先進的設計技術。目前，有些公司開發了基于載荷和變形的齒輪廓設計計算軟件，在齒輪書籍中采用高變位，對齒跟彎曲應力進行有限元分析，改進齒跟過渡曲線形狀，使齒輪在滿載情況下嚙合狀態得到極大改善，提高了接觸強度，采用彈性力學和有限元發對行星齒輪傳動機構進行載荷分析，時均載結構更加科學合理，采用彈性流通動壓潤滑分析技術分析齒輪嚙合區摩擦發熱和油膜狀態。上述先進的齒輪傳動設計的采用，使齒輪設計達到很高的技術指標。

101、</p><p>　　2.8.2制造水平的提高</p><p>　　刮板輸送機齒輪多采用表面硬化處理的高級低碳合金鋼材料，硬化工藝有：滲碳、氮化和表面淬火。隨著齒輪傳動功率的增加、體積的相對減小，癡戀接觸應力和齒跟彎曲應力大幅度增加。齒輪材料晶間雜質常成為疲勞裂紋萌生的根源。目前，國際主要刮板輸送機生產廠商廣泛采用真空電爐冶煉的低碳優質多合金齒輪鋼。齒輪熱處理采用計算機測控氣氛滲碳裝備，嚴

102、格監視爐內溫度、碳勢，控制齒輪裝備主要零件采用數控加工中心制造，加工精度有利大幅度提高，國內外有些公司齒輪制造精度達到相當我國GB100095-88《漸開線齒輪加工精度》標準6-6-5級以上。</p><p>　　3我國刮板輸送機的發展方向</p><p>　　隨著煤礦集約化礦井生產的發展，長壁工作面綜采裝備技術也不斷地向高端發展，以滿足生產能力大、自動化程度高、安全可靠的生產要求。目前，