外文翻譯--輸送帶技術的最新發展

1、<p><b>　　附錄</b></p><p><b>　　英文原文</b></p><p>　　Latest Developments in Belt Conveyor Technology</p><p>　　M. A. Alspaugh</p><p>　　Overland Con

2、veyor Co., Inc.</p><p>　　Presented at MINExpo 2004</p><p>　　Las Vegas, NV, USA</p><p>　　September 27, 2004</p><p><b>　　Abstract</b></p><p>　　Bu

3、lk material transportation requirements have continued to press the belt conveyor industry to carry higher tonnages over longer distances and more diverse routes. In order keep up, significant technology advances have be

4、en required in the field of system design, analysis and numerical simulation. Examples of complex conveying applications along with the numerical tools required to insure reliability and availability will be reviewed.&l

5、t;/p><p>　　Introduction</p><p>　　Although the title of this presentation indicates “new” developments in belt conveyor technology will be presented, most of the ideas and methods offered here have

6、been around for some time. We doubt any single piece of equipment or idea presented will be “new” to many of you. What is “new” are the significant and complex systems being built with mostly mature components ，what is a

7、lso “new” is the increasing ability to produce accurate computer simulations of system performance prior to the firs</p><p>　　As such, the main focus of this presentation will be the latest developments in c

8、omplex system design essential to properly engineer and optimize today’s long distance conveyance requirements. The four specific topics covered will be:</p><p>　　Energy Efficiency</p><p>　　Rout

9、e Optimization</p><p>　　Distributed Power</p><p>　　Analysis and Simulation</p><p>　　Energy Efficiency</p><p>　　Minimizing overall power consumption is a critical aspect

10、 of any project and belt conveyors are no different. Although belt conveyors have always been an efficient means of transporting large tonnages as compared to other transport methods, there are still various methods to r

11、educe power requirements on overland conveyors. The main resistances of a belt conveyor are made up of:</p><p>　　Idler Resistance</p><p>　　Rubber indentation due to idler support</p><

12、p>　　Material/Belt flexure due to sag being idlers</p><p><b>　　Alignment</b></p><p>　　These resistances plus miscellaneous secondary resistances and forces to over come gravity (li

13、ft) make up the required power to move the material.</p><p>　　In a typical in-plant conveyor of 400m length, power might be broken into its components as per Figure 1 with lift making up the largest single c

14、omponent but all friction forces making up the majority.</p><p>　　In a high incline conveyor such as an underground mine slope belt, power might be broken down as per Figure 2, with lift contributing a huge

15、majority. Since there is no way to reduce gravity forces, there are no means to significantly reduce power on high incline belts.</p><p>　　But in a long overland conveyor, power components will look much mor

16、e like Figure 3, with frictional components making up almost all the power. In this case, attention to the main resistances is essential.</p><p>　　The specifics of power calculation is beyond the scope of th

17、is paper but it is important to note that significant research has been done on all four areas of idlers, rubber indentation, alignment and material/belt flexure over the last few years. And although not everyone is in a

18、greement as to how to handle each specific area, it is generally well accepted that attention to these main resistances is necessary and important to overall project economics.</p><p>　　At the 2004 SME annua

19、l meeting, Walter Kung of MAN Takraf presented a paper titled “The Henderson Coarse Ore Conveying System- A Review of Commissioning, Start-up and Operation”2. This project was commissioned in December 1999 and consisted

20、 of a 24 km (3 flight) overland conveying system to replace the underground mine to mill rail haulage system.</p><p>　　The longest conveyor in this system (PC2) was 16.28 km in length with 475m of lift. The

21、most important system fact was that 50% of the operating power (~4000 kW at 1783 mt/h and 4.6 m/s) was required to turn an empty belt therefore power efficiency was critical. Very close attention was focused on the idler

22、s, belt cover rubber and alignment. One way to document relative differences in efficiency is to use the DIN 22101 standard definition of “equivalent friction factor- f” as a way to compare th</p><p>　　Route

23、 Optimization</p><p>　　Horizontal Adaptability</p><p>　　Of course the most efficient way to transport material from one point to the next is as directly as possible. But as we continue to transp

24、ort longer distances by conveyor, the possibility of conveying in a straight line is less and less likely as many natural and man-made obstacles exist. The first horizontally curved conveyors were installed many years ag

25、o, but today it seems just about every overland conveyor being installed has at least one horizontal change in direction. And today’s technolo</p><p>　　Figures 5 and 6 shows an overland conveyor transporting

26、 coal from the stockpile to the ship loader at the Tianjin China Port Authority installed this year. Designed by E.J.O’Donovan & Associates and built by Continental Conveyor Ltd of Australia, this 9 km overland carri

27、es 6000 mtph with 4x1500 kW drives installed.</p><p>　　The Wyodak Mine, located in the Powder River Basin of Wyoming, USA, is the oldest continuously operating coal mine in the US having recorded annual prod

28、uction since 1923. It currently utilizes an overland (Figure 7) from the new pit to the plant 756m long (2,482 ft) with a 700m (2,300 ft) horizontal radius. This proves a conveyor does not need to be extremely long to be

29、nefit from a horizontal turn.</p><p><b>　　Tunneling</b></p><p>　　Another industry that would not be able to use belt conveyors without the ability to negotiate horizontal curves is c

30、onstruction tunneling. Tunnels are being bore around the world for infrastructure such as waste water and transportation. The most efficient method of removing tunnel muck is by connecting an advancing conveyor to the ta

31、il of the tunnel boring machine. But these tunnels are seldom if ever straight. One example in Spain is the development of a 10.9m diameter tunnel under Barcelona </p><p>　　In another example, Frontier Kempe

32、r Construction is currently starting to bore 6.18 km (20,275 ft) of 3.6m (12 foot) diameter tunnel for the Metropolitan St. Louis (Missouri) Sewer District. The Baumgartner tunnel (Figure 10) will be equipped with a 6.1

33、km conveyor of 600mm wide belting with 4 intermediate drives.</p><p>　　Pipe Conveyors</p><p>　　And if conventional conveyors cannot negotiate the required radii, other variations of belt conveyo

34、r such as the Pipe Conveyor might be used.</p><p>　　In its simplest description, a pipe conveyor consists of a rubber conveyor belt rolled into a pipe shape with idler rolls. This fundamental design causes t

35、he transported material to be totaled enclosed by the belt which directly creates all the advantages. </p><p>　　The idlers constrain the belt on all sides allowing much tighter curves to be negotiated in any

36、 direction. The curves can be horizontal, vertical or combinations of both. A conventional conveyor has only gravity and friction between the belt and idlers to keep it within the conveyance path. </p><p>　　

37、Another benefit of pipe conveyor is dust and/or spillage can be reduced because the material is completely enclosed. A classic example where both environment and adaptability to path were particularly applicable was at t

38、he Skyline Mine in UT, USA (Figure 12). This 3.38 km (11,088 ft) Pipe Conveyor was installed by Thyssen Krupp Robins through a national forest and traversed 22horizontal and 45 vertical curves.</p><p>　　Mets

39、o Rope Conveyor</p><p>　　Another variation from conventional is the Metso Rope Conveyor (MRC) more commonly known as Cable Belt. This product is known for long distance conveying and it claims the longest si

40、ngle flight conveyor in the world at Worsley Alumina in Australia at 30.4 km. With Cable Belt, the driving tensions (ropes) and the carrying medium (belt) are separated (Figure 13).</p><p>　　Figure 15 shows

41、a 10.4 km Cable Belt with a 430m horizontal radius at Line Creek in Canada.</p><p>　　Vertical Adaptability</p><p>　　Sometimes material needs to be raised or lowered and the conventional conveyor

42、 is limited to incline angles around 16-18 degrees. But again non-traditional variations of belt conveyors have been quite successful at increased angles as well as straight up.</p><p>　　High Angle Conveyor

43、(HAC)</p><p>　　The first example manufactured by Continental Conveyor & Equipment Co. uses conventional conveyor components in a non-conventional way (Figure 16). The concept is known as a sandwich conve

44、yor as the material is carried between two belts.</p><p>　　Continental’s 100th installation of the HAC? was a unique shiftable installation at Mexican de Canenea’s heap leach pad (Figure 17).</p><

45、p>　　Pocketlift</p><p>　　The second example shows a non-traditional belt construction which can be used to convey vertically (Figure 18).</p><p>　　This Metso Pocketlift belt was installed by F

46、rontier Kemper Constructors at the Pattiki 2 Mine of White County Coal in 2001 (Figure 19). It currently lifts 1,818 mtph of run-of-mine coal up 273 m (895 ft). </p><p>　　Distributed Power</p><p&g

47、t;　　One of the most interesting developments in technology in the recent past has been the distribution of power along the conveyor path. It has not been uncommon to see drives positioned at the head and tail ends of lon

48、g conveyors and let the tail drive do the work of pulling the belt back along the return run of the conveyor. But now that idea has expanded to allow designers to position drive power wherever it is most needed. </p&g

49、t;<p>　　The idea of distributing power in multiple locations on a belt conveyor has been around for a long time. The first application in the USA was installed at Kaiser Coal in 1974. It was shortly thereafter tha

50、t underground coal mining began consolidating and longwall mines began to realize tremendous growth in output. Mining equipment efficiencies and capabilities were improving dramatically. Miners were looking for ways to i

51、ncrease the size of mining blocks in order to decrease the percentage of id</p><p>　　When panel lengths were increased, conveyance concerns began to appear. The power and belt strengths needed for these leng

52、ths approaching 4 -5 km were much larger than had ever been used underground before. Problems included the large size of high power drives not to mention being able to handle and move them around. And, although belting t

53、echnology could handle the increased strength requirements, it meant moving to steel reinforced belting that was much heavier and harder to handle and more im</p><p>　　Today, intermediate drive technology is

54、 very well accepted and widely used in underground coal mining. Many mines around the world have incorporated it into their current and future mine plans to increase the efficiency of their overall mining operations. <

55、;/p><p>　　The tension diagram in Figure 20 shows the simple principal and most significant benefit of intermediate belt conveyor drives. This flat, head driven conveyor has a simple belt tension distribution as

56、 shown in black. Although the average belt tension during each cycle is only about 40% of the peak value, all the belting must be sized for the maximum. The large drop in the black line at the head pulley represents the

57、total torque or power required to run the conveyor. </p><p>　　By splitting the power into two locations (red line), the maximum belt tension is reduced by almost 40% while the total power requirement remains

58、 virtually the same. A much smaller belt can be used and smaller individual power units can be used. To extend the example further, a second intermediate drive is added (green line) and the peak belt tension drops furthe

59、r. </p><p><b>　　中文譯文</b></p><p>　　輸送帶技術的最新發展</p><p>　　M. A. Alspaugh</p><p>　　Overland Conveyor Co., Inc.</p><p>　　Presented at MINExpo 2004<

60、;/p><p>　　Las Vegas, NV, USA</p><p>　　September 27, 2004</p><p><b>　　摘要</b></p><p>　　大量的物質運輸需求在促使帶式輸送機繼續朝大運量、長距離、多路徑發展。為滿足生產力的發展，在系統設計、分析和數值模擬等領域需要更多重要的技術革新。在這

61、里我們將回顧一些復雜的、利用數學工具來保證其可靠性和適用性的實例。</p><p><b>　　緒論</b></p><p>　　盡管這篇文章的標題指出將會展現給大家?guī)捷斔蜋C(jī)“新的”發展技術，但當中的大多數的思想和方法早已經四處流傳了?？峙缕渲腥魏我粋€(gè)的簡單設備或想法對大多數人都不是“新的”。 所謂“新的”東西就是一個在成熟的條件下建立的復雜、重要的系統，是在一個系

62、統檢測(試運轉)之前對系統性能的精確計算機模擬能力的提高。</p><p>　　因而，我們討論的主要焦點是，復雜帶式輸送機系統設計的最新發展，以及針對長距離運輸?shù)脑O(shè)計和優化。</p><p>　　四個被涵蓋的主題是：</p><p><b>　　能量利用效率</b></p><p><b>　　線路優化<

63、/b></p><p><b>　　動力分配</b></p><p><b>　　分析和仿真</b></p><p><b>　　能量利用率</b></p><p>　　將總耗電量降到最小不論對于帶式輸送機還是其它項目都是問題的關鍵。盡管地面大運量運輸時利用帶式輸送機總是

64、效率很高的手段，還是有很多方法來降低其能量需求。帶式輸送機的運行阻力由以下幾部分組成：</p><p><b>　　托輥?zhàn)枇?lt;/b></p><p><b>　　膠帶與托輥架擠壓</b></p><p><b>　　膠帶垂度的影響</b></p><p><b>　　

65、調心托輥的影響</b></p><p>　　這些阻力加上其它各種次要的阻力以及用來克服重力的升力，就形成所需總共的動力。</p><p>　　在一條 400 m 長度的典型廠內輸送機中，動力可能依照?qǐng)D 1 被分成幾部分，其中運輸提升所需的動力是其中最大的一塊，而所有摩擦阻力又占它的了多半數。</p><p>　　對于大傾角輸送機, 例如煤礦井下帶式輸送機

66、,動力可能依照?qǐng)D 2 所示分配，其中用于提升的動力占了極大的一部分。 因?yàn)闆]有方法減少重力的影響，所以就沒有方法能顯著地減少在大傾角帶式輸送機上的動力消耗。</p><p>　　但是在長距離地面輸送機中，動力組成的幾個部分就與圖3所示較為相似，動力幾乎全都消耗在摩擦阻力上。所以在這種情況下應特別關注帶式輸送機的主要阻力。</p><p>　　有關詳細的動力計算在這里不做贅述，但值得關注的是

67、，對于托輥、膠帶、調心、物料/膠帶彎曲這四方面近年來已完成許多有意義的研究工作。</p><p>　　對于各個具體方面的問題如何處理，雖然仁者見仁、智者見智，但通常大家都認為，將著眼點放在主要阻力上對整個工程的經濟性是重要且必需的。</p><p>　　在 2004 SME 年會上,MAN Takraf 的Walter·Kung 介紹了一篇題為“亨德森粗礦石運輸系統——運行、啟動

68、、操作評估”的論文。 這個工程于 1999 年12月啟動，是由一條 24公里(3段)的地面輸送系統來代替地下挖掘碾磨軌道拖運系統。</p><p>　　這個系統 (PC2) 中的最長運送機長16.28 公里，提升高度475 m 。系統最重要的工況是使帶空載運轉時需要50% 的額定功率(約4000 千瓦，在1783 mtph 和 4.6 m/s時)，這時功率效率達到臨界值。要把注意力集中在托輥, 覆蓋膠和調心上。

69、一種判斷效率上的相對差異的方法是使用 DIN(德國工業標準) 22101 標準定義中的" 等效磨擦因數—f" ，就如比較各個主要阻力的相對差異的方法一樣。過去，用于設計輸送機的典型f值DIN規定為0.016左右，但 MAN Takraf 估計以他們對動力情況的了解，允許他們將f值降低30％，達到0.011。該值的減少會給設備的基本投資節省一筆不小的開支。試運行后，6次換檔的實測結果顯示，f值為0.0075，或是更小，

70、比期望值低30％左右。 Kung說，只將f從期望值減少每年就會節省電費$100,000。</p><p><b>　　路徑最優化</b></p><p><b>　　水平運輸?shù)倪m用性</b></p><p>　　當然，從一處到另一處運送物料最有效的方法是盡可能直接地運輸。但是當我們用輸送機長距離連續輸送時,由于人為或自然的

71、原因，能在直線運輸?shù)目赡苄陨僦稚佟５谝慌_(tái)水平曲線式輸送機的安裝在數年以前，但是今天幾乎每一臺安裝的地面輸送機都至少有一個水平方向的變化。而且今天的技術允許設計者相對容易地調整這些曲線。 </p><p>　　圖 5 和 6 顯示在中國天津港務局，一條今年安裝的地面帶式輸送機正將煤從倉庫運送到裝船機。 這條9 公里的帶式輸送機由 E.J.O'Donovan與 Associates 設計、澳大利亞的Cont

72、inental Conveyor 公司制造，運量為6000 mtph ，驅動功率為4 x1500 kW。</p><p>　　位于美國懷俄明州Powder River 盆地的Wyodak礦井,是自1923年美國有年產量記錄以來最老的煤礦，而且如今還在不斷地產煤。它現在利用一臺水平半徑為700 m(2,300 ft) 地面帶式輸送機(圖 7) ，新煤坑離廠 756 m (2,482 英尺)。這證明受益于水平轉向，帶

73、式輸送機不需要非常的長。</p><p><b>　　隧道</b></p><p>　　如果沒有水平曲線，建造隧道就不能利用帶式輸送機了。全世界都在挖掘隧道，以作為下水道或是運輸?shù)然A(chǔ)設施。將挖掘隧道時產生的棄渣運出，最有效的方法是在隧道鉆機的尾部連接一個推進式帶式輸送機。但很少有隧道是筆直的。</p><p>　　例如，西班牙巴塞羅那的地下有

74、一條直徑為 10.9 m 隧道，它是倫敦地鐵系統的延伸。Continental Conveyor 公司安裝了如圖 8 、9所示的第一個4.7 公里輸送機，而且最近已經接受負責安裝第二個 8.39 公里的輸送機。</p><p>　　Frontier Kemper Construction 正開始為Metropolitan St. Louis (位于密蘇里州)的排水區挖掘一條6.18 公里(20,275 英尺) 長

75、、3.6 m(12英尺)寬的隧道。 這個名為Baumgartner 的隧道(圖 10) 將會裝備一個長6.1 公里、帶寬600 毫米、具有4個中間傳動裝置的帶式輸送機。</p><p><b>　　管狀輸送機</b></p><p>　　如果傳統的輸送機不能夠滿足半徑的要求, 就可用其他帶式運送機的變體例如管狀帶式輸送機。</p><p>　　

76、簡單的描述一下，一個管狀輸送機由一個卷成桶狀的傳送帶與輥?zhàn)咏M成。這種很基本的設計方法可以使物料被輸送帶完全包起來，直接產生較高的效益。</p><p>　　托輥在各方向約束著膠帶，就允許膠帶朝各個方向較大地彎曲。 曲線可能是水平的，垂直的或二者的結合。而傳統的輸送機只能靠膠帶和托輥的重力和摩擦力保證運輸路徑。</p><p>　　管狀輸送機的另一個好處是能減少粉塵及灑漏，因?yàn)槲锪鲜峭耆环?/p>

77、閉的。這有一個經典的例子，在美國猶他州的Skyline 礦中(圖 12)，路徑與周圍環境很好的適應. 這條3.38 公里(11,088 英尺)長的管狀輸送機是由ThyssenKrupp Robins 安裝，穿過一個國家森林，而且中間水平換向22次、豎直換向45次。</p><p>　　Metso鋼繩輸送機</p><p>　　Metso鋼繩輸送機(MRC)是另一種從傳統型變化而來輸送機，人

78、們一般稱它為鋼繩牽引輸送機。這一產品以長距離輸送聞名，世界最長的刮板式輸送機在澳大利亞的 Worsley Alumina ，長度為30.4千米。它的牽引體與承載體是分開的(圖 13)。</p><p><b>　　垂直的適用性</b></p><p>　　有時物質的需要被升起或降落，而常規的輸送機的傾角被限制在16-18 度。 但是帶式輸送機的再一次突破常規的變化使帶

79、式輸送機可以成功地增大傾角，甚至可以垂直輸送。</p><p>　　大傾角輸送機 (HAC)</p><p>　　大傾角輸送機的第一臺樣機由Continental Conveyor & Equipment Co.制造出來，它用的是常規的部件、非常規的手段(圖16)。人們認為采用這種方法，物料夾在兩層輸送帶之間，整個輸送機看起來就像一個大的三明治。</p><p&

80、gt;　　Continental公司安裝制造的第100臺大傾角輸送機是一種獨特的、可拆移的輸送機，它位于墨西哥的Mexican de Canenea 矸石過濾堆(圖 17).</p><p>　　Pocketlift</p><p>　　圖 18展示另一條非常規設計的輸送帶，它能用來垂直運輸。這一條 Metso Pocketlift 輸送帶由Frontier Kemper Construc

81、tors 于2001年安裝在 White County 的 Pattiki 2號井(圖19)，現在它的運量是1,818 mtph，可將煤提升 273 m(895 英尺) 。</p><p><b>　　動力分配</b></p><p>　　當下有關帶式輸送機新技術的研究，最熱門的內容應該數整個路線的動力分配問題了。將驅動裝置布置在輸送機頭部和尾部，然后只讓尾部驅動裝置

82、負責拉回輸送帶，這對于長距離帶式輸送機是不常見的。但現在的設計思想已發展成為允許設計者將動力布置在最需要的地方。</p><p>　　將動力布置在帶式輸送機的多個部位的想法很早以前就有了。第一次在美國應用是在1974年，Kaiser煤礦。不久，地下礦井開始合并，長壁開采的煤礦的產量得到極大提高。其中采礦設備效率和性能的提高是非常引人注目的。礦工們正在尋找方法增大采區，以減少將采煤設備從一個采區搬到另一個采區所花費

83、的時間。這樣，煤區表面寬度與長度也不斷增加。</p><p>　　當矩形采煤區的長度增加時，就應注意一下運輸條件。當長度增加到4～5千米時，輸送機對動力與膠帶強度的需要增加到前所未有的程度。問題包括：如此大尺寸的大功率驅動裝置別說搬運了，即使皮帶(傳動)裝置技術可以滿足增加的強度需求,也意味著要費很大勁來回搬運傳動裝置，更重要的是要用硫化接頭。由于長壁開采區的輸送機需要經常改變長度，礦工們總是不停地從系統中增加或

84、取去皮帶傳動裝置的托輥。時間浪費更加嚴重。但現在需要超越了風險，而且廣泛采用中間傳動裝置限制了皮帶中的張力過大，并允許采用纖維帶。</p><p>　　今天, 中間驅動技術已被人們接受而且廣泛地應用于地下礦井。世界上多數礦井經將它納入他們當前和未來的開采計劃以增加他們所有的開采工作的效率。</p><p>　　圖 20 中的張力圖簡單地說明了帶式輸送機中間傳動裝置的主要優點。頭部驅動輸送機