汽油機滾流強度測量的試驗研究.pdf

1、 獨創性聲明 本人聲明所呈交的學位論文是本人在導師指導下進行的研究工作和取得的研究成果， 除了文中特別加以標注和致謝之處外， 論文中不包含其他人已經發表或撰寫過的研究成果， 也不包含為獲得 天津大學 天津大學 或其他教育機構的學位或證書而使用過的材料。 與我一同工作的同志對本研究所做的任何貢獻均已在論文中作了明確的說明并表示了謝意。 學位論文作者簽名： 簽字日期： 年 月 日 學位論文版

2、權使用授權書 本學位論文作者完全了解 天津大學 天津大學 有關保留、使用學位論文的規定。特授權 天津大學 天津大學 可以將學位論文的全部或部分內容編入有關數據庫進行檢索，并采用影印、縮印或掃描等復制手段保存、匯編以供查閱和借閱。同意學校向國家有關部門或機構送交論文的復印件和磁盤。 （保密的學位論文在解密后適用本授權說明） 學位論文作者簽名： 導師簽名： 簽字日期：年 月 日

3、 簽字日期：年 月 日 II ABSTRACT The in-cylinder flow is one of the many important factors which significantly affect the combustion process, the power performance, fuel economy, and emission of engines. The inlet po

4、rt plays a key role in the formation of macroscopic motion (tumble and swirl) and turbulence level during the late stage of the intake stroke, and makes a vital impact on the engine performance. Steady flow test rigs are

5、 often used to evaluate the port performance. Firstly, the influence of measurement devices and different evaluation methods on the tumble ratio is studied using a swirl torque meter and paddle wheel anemometer on a stea

6、dy flow rig, respectively. Further, a three-dimensional particle image velocimetry (3D-PIV) system is used to measure the three-dimensional velocity fields. The results show that the high out-plane velocity field is form

7、ed by two jets which flow through the intake valves. One of the two jets is strong and the other is weak. When these two jets met with each other and the collision results the large-scale vortices flow in right-about com

8、pared to the main flow in the measurement plane. The flow symmetry under the small valve lift is poor, and it increases with the valve lift. Secondly, based on the three-dimensional velocity fields, two evaluation method

9、s of tumble ratio are proposed from the view of the characteristics and evolution of tumble flow. The results show that the tumble ratios obtained using the 3D-PIV are larger than that obtained using the test rig. The re

10、asons are that, on the one hand, the measurement plane is 0.5B from the cylinder bottom. On the other hand, the 3D-PIV direct measurement method decreases the local flow resistance because the orthogonal head of the simu

11、late cylinder and the paddle were abandoned. In addition, both of these two evaluation methods using 3D-PIV could show the variation of the tumble ratio objectively no matter whether the tumble is strong or weak. However

12、, the tumble ratios obtained by the method based on the theoretical airflow rotate speed and the theoretical engine speed using 3D-PIV are non-monotonic and have a local maximum value under small valve lifts. The local m

13、aximum value under small valve lift is higher than that under large valve lift. Therefore, this method cannot reflect the variation of the tumble ratio exactly. While the tumble ratio obtained by the method based on theo

14、retical tangential speed and theoretical axial speed using 3D-PIV increases with the valve lift and it is reasonable relatively. Therefore, the second method using 3D-PIV is more reasonable. KEY WORDS：Gasoline Engine, Tu